节省时间并独立使用新的打桩解决方案

Author: Karina Lumholt

As part of a five-year-long construction project widening and modernising the highway ring outside of Berlin, Germany, the internationalHABAU GROUP签约Arkil A/S, one of Denmark's largest contracting companies. Arkil Fundering is tasked to prepare the soft base course with concrete piles, ensuring the ground layer is able to carry the weight of the new highway lanes.

Specialised in foundation and marine works, Arkil Fundering has been working for five months on the project piling 3,500 piles to stabilise the soft and sanded ground. Arkil Fundering and its German subsidiary, Specialtiefbau, worked with two piler rigs equipped with the newLeica图标iRP3机器控制解决方案与Leica MC1软件。

“We don’t need a surveyor to stake out the piles manually,直到项目经理LeveRüscher说。“We can now drive an average of 25-50 piles per day depending on the length of the piles and on how soft the underground is,LeveRöscher说。“机器控制解决方案使我们可以节省每堆5至10分钟。透明

直到LeveRöscher在柏林建筑工地担任项目经理。

借助桩解决方案的自动中风注册，团队通过不手动测量堆积来节省时间。

Finding piles automatically

RenéVestergård在柏林担任机器运营商。

这样的地面稳定项目始于一家岩土公司对地下土壤的检查。Arkil A/S为岩土专家进行了测试堆积，然后以桩模式计算了桩的坐标，并将这些坐标直接发送到MC1软件。

桩的3D位置显示在机器内机器机控制面板上。新软件使操作员能够使用圆柱视图或拆分屏幕视图，该视图以颜色代码和靶心视图显示桩。用户友好的图形指导操作员将桩塔的塔式导航到正确的位置。

René Vestergaard, machine operator at Arkil A/S has been working with the new iRP3 solution, explains his workflow, “我发现桩模式概述上的桩号，机器控制解决方案可以自动找到最近的桩Auto Snapfunctionality。在机器控制之前，用柔软的沙子工作时很容易移位物理钉。现在，我不会在等待传统测量设备的测量师时浪费时间，如果一堆出现问题，我可以轻松移至现场的另一个地方维斯特加德说。

将数据文件从丹麦发送到德国的机器

Mads D. Raunskov works as head of department (Pile Driving/Drilling & Tunneling) at Arkil A/S.

The introduction of the MC1 software for rigs includes the connection withLeica ConX, a cloud-based web interface for sharing and visualising project data.

Arkil A/S部门负责人Mads D Raunskov解释了数字连接的优势，“”桩毛团队现在可以独立工作。我们可以将数据文件从丹麦发送到德国的计算机，操作员可以立即开始工作。透明

Machine operator, Jan Vedel works in the heavy construction industry for more than 30 years and operates piler rigs for the past four years. He benefited from the remote support through Leica ConX several times. In case he needs remote help, a teammate back at the office in Denmark can directly access the control panel on the machine and support Vedel.

After driving a pile into the ground, the operators log each pile in the iRP3 solution. Then, the information is sent via ConX to the office, generating a piler report that serves as as-built documentation.

扬·韦德尔（Jan Vedel）在重型建筑行业拥有30年的经验。

The machine control solution for piler rigs enables foremen and machine operators to work independently and productively as a team on a heavy construction site even far away from the headquarter.