Leica Caintivate检查道路表面和隧道对齐

几周前，Leica Captivate V2被发布 - 在此版本中包括Inspect Surface应用程序的其他功能 - 现在可以检查道路表面和隧道。

阿拉斯泰尔·格林（Alastair Green）, onboard software business director at Leica Geosystems, will explain more about the app in this blog post. there is also a link included to video highlighting the new functionality...

Alastair，您能简要解释新功能吗？

当然。首先，让我提醒读者，我们已经在2015年12月发布了Leica Captivate v1.30的Inspect Surface应用程序。请查看此视频，以提醒自己该应用如何允许简单的表面，例如水平地板，垂直墙壁和气缸。- 通过检查，我的意思是将现实与设计进行比较

For example, in the image below the blue areas indicate where the floor is lower than it should be and the red area is where it is higher than it should be. The user has clicked in the red zone, and the numbers on the left show that this area is higher than it should be by 4.3 mm.

新功能是，现在还可以以类似的方式检查道路表面和隧道对齐方式 - 观看此视频以了解有关此的更多信息。

What does that really mean – it is now possible to also inspect road surfaces and tunnel alignments?

Well imagine you need to check a road surface which has just been laid. You suspect the road surface is not per design, or maybe you suspect there are high spots, or even worse, low areas where water may collect.

You can now measure the as-built road surface and compare it the original road design – in the field you can see all the out of tolerance areas. And if needed, create a comprehensive report of the surface – all very useful to check the finished level of the various layers of the road or assess where repairs need to be made.

Or if you are working in tunnel you can measure the excavation so far – and immediately view the areas where extra rock needs breaking out, or where more tunnel lining needs applying.

>

Imagine how much time and money this can save!

好的 - 但是用户如何向工人指示需要工作的区域？

Easy! From the pop-up menu, select the Turn to point and the instrument will turn to the selected point – the red laser device shows exactly where it is necessary to make changes.

What instrument can use this app?

This app can be used on the Leica CS20 controller, CS35 tablet, TS16 and TS60 robotic total stations and MultiStation MS60.

If the CS20 or CS35 is used, it can be used with any total station or GNSS which can be connected to either device.

So this application is not just for MultiStations?

不，所有总站甚至亚博5分钟快三GNSS接收器都可以使用此应用程序 - 只需以通常的方式测量点，然后将测量点与设计表面进行比较。

How can I learn more about this app?

了解更多信息的最好方法是查看此博客中链接的视频或Leica Geosystems YouTube查nnel.

There are two videos covering several use cases for the Inspect Surface app but I’m sure our customers can think of many more!

谢谢阿拉斯泰尔
没问题。我的荣幸

阿拉斯泰尔·格林（Alastair Green）
商业总监，现场测量软件