压实控制应用

我们正在继续有关可用于Leica Caintivate的应用程序的一系列文章。

我们在本文中介绍的应用程序可以帮助进行建筑材料压实，因此有助于防止以后生命中的结构问题。压实是施工过程的重要组成部分，该应用程序可以帮助达到每一层材料所需的正确压实水平。

压实控制应用

所有建筑物，例如道路，铁路，桥梁，建筑基础，地球固定结构，大量排水管或管道，都需要建立在材料固体层的基础上。例如，通过放下材料层（首先是较大的岩石，然后是较小的岩石，然后是沥青等层等）来创建道路。

As each layer of material is laid, it needs to be compacted - this is normally done by large rollers or compactors.

Each material needs to be compacted to a specified level of compaction (normally expressed as a percentage).

压实控制应用allows repeated measurements to be made to the top of the material as it is compacted by the roller.

When starting the app, a new layer can be created. This means a set of measurements is made on top of a newly spread layer of material. Several points should be measured that are evenly spread over the surface of the layer.

一旦测量了足够的点，请按F5（完成）. Now the roller/compactor machine goes across the layer for the first round of compaction. Afterwards the second “level” is measured, meaning the same points are measured again.

When using reflectorless measurements, this can be done automatically by using theStake points auto来自Toolsmenu of the app (UseFn+F6 (Tools)）。使用此功能时，该应用将在表面上自动找到与第一个级别测量的相同点。

Once the second level of points has been measured, a message is displayed, showing the percentage of first level points that have been measured on the second level (100% means all level 1 points were measured also on level 2) and the average height difference between the measured points on level 1 and level 2.

TheSettings该应用的面板允许定义材料足够压实的压实比。默认值为10％。

为了计算压实率，该应用程序将1级和2级之间的高度差为100％。然后，它比较了随后测量水平的高度差异与此参考高度差异。

一旦两个测得的水平之间的高度差（意味着滚筒/压实机的一轮后，遍布整个层）就小于定义比率限制（例如10％）在第一个高度差异中，该应用将标记为绿色点，并告知用户该材料已经充分滚动，并且已经达到了压实规范。

Afterwards theCompaction Results显示。

A stylesheet can be used to create a comprehensive report of the compaction measurements.

如果物质层不够压实，这可能会导致生活后期的问题。另外，如果这些层过度压缩，则浪费了钱。该应用程序可以帮助防止这两个问题。

该应用程序可以从Leica Myworld下载并有一个试用期，因此请随时尝试购买。如果您对此应用有兴趣，请联系您当地的Leica代表。