Revolutionising the luxury yacht building industry with laser scanning

Author:Reka Vasszi

Listening as the wind fills the sails, feeling the heat of the sun and the wind blowing on your skin while sailing through the oceans.Royal Huisman, a Dutch maritime craftsmanship and superyacht builder, makes sure all this happens in the most luxurious environment possible.

海洋仙女Elfje是一个52.36-metre-long eco-friendly luxury yacht, built byRoyal Huismanin the Netherlands at their Vollenhove shipyard. The luxury vessel is replete with sophisticated exterior design and engineering by Hoek Design and a graceful interior by Redman Whiteley Dixon.

From concept to completion, the yacht took four years to be designed, built and dressed. To accelerate the workflow, Royal Huisman requestedLido2D3D, a Dutch luxury interior drawing company, to think about a solution to speed up the carpentry work for the deckhouses.

Innovating the building process

Lido2D3Dtransforms customer’s concepts into detailed 3D drawings to support the work of the interior builders. The company uses 3D laser scanners to map out the ships with millimetre accuracy – the resulting 3D models serve as the basis for creating detailed interior plans.

“Practice, experience and craftsmanship brought us knowledge and perfection, therefore, we use state-of-the-art laser scanning technology to provide accurate results to our customers,”said Folkert Boermans, founder of Lido2D3D.

Deckhouses的木工工作是一个冗长的手术，需要熟练的木匠，不允许犯错。甲板由铝制成，并覆盖着大柚木。为了加快为覆盖范围准备单个模具形式并准备柚木的工作流程，lido2d3d用leica捕获了船ScanStation P20high-definition 3D laser scanner. The team created a数字3D模型to prepare the parts for Computer Numerical Control (CNC) manufacturing production.

With the combination of the ScanStation P20 and the LeicaFlexline TS09总站, it tookonly eight hours to scan内外两个甲板。然后使用该点云注册并使用Leica CycloneREGISTER 360 point cloud processing office software. Once the meshed model was ready, the surface model was created and could be transferred into any CAD software. Thanks to the efficiency of the Leica Geosystems solution, the full job,from the initial scanning to the surface model,只花了58小时for Lido2D3D experts.

Meshed model of Elfje

Having a了d 3D surface modelwith accurate measurements, enabled Royal Huisman to prepare all covering parts via CNC, thus saving time and increasing quality of the final product.

“The use of a 3D laser scanner is unique in the yacht building industry. It is important to have a very detailed design of the ship because we create most interior drawings in 3D. Our Leica ScanStation P20 3D laser scanner is able to map out the ship with millimetre accuracy. The scanner provides us the best basis possible to create a detailed interior drawing,”博曼人说。

Performing reliable data

Elfje has been优化以快速巡航and operate at a professional level with the intention of taking part in sailing regattas. Lido2D3D was, therefore, asked to measure the tender hatch for replacing.

This task presented two challenges. First, the team could onlycarry out the survey once without any mistakes由于游艇位于安提瓜，但舱口将在荷兰生产。生产新的舱口后，它将在游艇当时航行并在当地安装的任何地方运输。因此，必须使用A的测量值准确maximum deviation of up to 2 mm.

The second challenge was the ship was floating on the water and the team could not use the compensator of the scanner and the total station.

To overcome the challenges, the team used theScanStation P20in combination with the TS09 total station. Once Lido2D3D specialists scanned the hatch and the surrounding deck in a closed position, they repeated the same procedure with the hatch lifted above the deck. The deck calking and the outside shape of the hatch was also measured by the total station. To compare the data from the total station with the accuracy of the point cloud from the scanner, Lido2D3D used paper targets to double-check the data.

Analysing the smallest details

Tomaximise the speedof Elfje, Royal Huisman had to prepare a new rudder. The rudder blades must be the same on both sides to achieve the perfect water flow, therefore the Dutch superyacht builder company asked Lido2D3D to perform an analysis and check for possible deviations.

After scanning Elfje with theScanStation P40, the new blades were compared to a theoretical 3D model, allowing experts toidentify the slight differencesbetween the right and left part of the rudder.

Laser scanning is truly revolutionising the luxury yacht building industry by increasing quality and efficiency for a range of stakeholders. From planning to building and furnishing, laser scanning provides a reliable solution when it has to be right.