Reflectors
最大准确性和范围
The range of a prism results from, among other things, its coating and the glass geometry. A number of Original prisms from Leica Geosystems have a special coating on the reflective surfaces – the Anti-Reflex Coating, and a copper coating on the reverse side. Without these, the range of distance measuring, ATR and Powersearch would be reduced by up to 30%. The workmanship and the durability of the copper coating are decisive for a long life. The glass dimensions, the position in the holder and with it the areal orientation, are important for measuring accuracy.
Transparent choice
Leica Geosystems为不同的应用领域提供各种尺寸的透明棱镜。这些是标准棱镜，特殊棱镜，迷你棱镜以及监测棱镜。
专业5000：HIGHEST ACCURACY
Professional 3000:最大寿命
Professional 1000:COST EFFECTIVE MEASURING
定心精度
如果未使用原始棱镜支架，则会发生测量误差。替代不是根据Leica Geosystems标准配置的，并且通常在棱镜，支架和记录销之间表现出位移。持有者和棱镜构成了定义定期和重复精度的单元。玻璃棱镜或支架上的几何形状的最小尺寸变化可以导致与定心轴的偏差，从而产生测量误差。
范围
The beam deviation of a prism defines the its maximum range, according to the principle "entering beam should equal the exiting beam". The smaller the beam deviation (measured in angle seconds), the greater the directly reflected signal strength to the sender optic. The returned signal quality defines the maximum range of a measurement.
Lifetime
In contrast to many conventional prisms, the reflective copper coating on the reverse side of Original prisms consists of a support coating, a vacuum-metallised copper coating, a protective coating and an overlying coat of lacquer. The special adhesive lacquer protects the underlying layers from corrosion and detachment. Working together, the copper coating and the lacquer increase the life of the prism significantly. An additional anti-reflex coating on the sensitive front surface of the prism provides a tough resistance to scratches. The production process of these coatings is so complex that only a very few manufacturers worldwide meet the requirements of Leica original prisms.
Measurement Accuracy
当使用没有防反射涂层的棱镜使用时，测量误差经常发生在关闭范围内，因为棱镜的前部总是直接反映一定百分比的信号。当水滴液滴累积或棱镜变得有雾时，在背面没有铜涂层的棱镜时发生错误。因此，Leica Geosystems使用所述的反射涂层或专利制度来预防雾化和冷凝。
Transparent choice
Leica Geosystems为不同的应用领域提供各种尺寸的透明棱镜。这些是标准棱镜，特殊棱镜，迷你棱镜以及监测棱镜。
专业5000：HIGHEST ACCURACY
Professional 3000:最大寿命
Professional 1000:COST EFFECTIVE MEASURING
定心精度
如果未使用原始棱镜支架，则会发生测量误差。替代不是根据Leica Geosystems标准配置的，并且通常在棱镜，支架和记录销之间表现出位移。持有者和棱镜构成了定义定期和重复精度的单元。玻璃棱镜或支架上的几何形状的最小尺寸变化可以导致与定心轴的偏差，从而产生测量误差。
范围
The beam deviation of a prism defines the its maximum range, according to the principle "entering beam should equal the exiting beam". The smaller the beam deviation (measured in angle seconds), the greater the directly reflected signal strength to the sender optic. The returned signal quality defines the maximum range of a measurement.
Lifetime
In contrast to many conventional prisms, the reflective copper coating on the reverse side of Original prisms consists of a support coating, a vacuum-metallised copper coating, a protective coating and an overlying coat of lacquer. The special adhesive lacquer protects the underlying layers from corrosion and detachment. Working together, the copper coating and the lacquer increase the life of the prism significantly. An additional anti-reflex coating on the sensitive front surface of the prism provides a tough resistance to scratches. The production process of these coatings is so complex that only a very few manufacturers worldwide meet the requirements of Leica original prisms.
Measurement Accuracy
当使用没有防反射涂层的棱镜使用时，测量误差经常发生在关闭范围内，因为棱镜的前部总是直接反映一定百分比的信号。当水滴液滴累积或棱镜变得有雾时，在背面没有铜涂层的棱镜时发生错误。因此，Leica Geosystems使用所述的反射涂层或专利制度来预防雾化和冷凝。
您申请的最佳棱镜
Leica Geosystems为不同的应用领域提供各种尺寸的透明棱镜。这些是标准棱镜，特殊棱镜，迷你棱镜以及监测棱镜。
HIGHEST ACCURACY
棱镜的经销uish themselves through a centring accuracy of under 1mm and the best possible beam deviation of < 2" to achieve the maximum range.
最大寿命
针对共同的操作距离优化，这些棱镜呈现出高达8英寸的光束偏差，在市场上独特的光学涂层的特殊工作，提供高于平均寿命。
COST EFFECTIVE MEASURING
尽管其成本均比成本较高，但1000系列符合严格的Leica地质系统过程控制以及用户对寿命的高要求。
For more details browse our Accessories Catalogue
Transparent choice
Leica Geosystems在三个系列中提供其原始配件，以实现不同的要求。专业5000，专业300和专业1000
Leica Geosystems在三个系列中提供其原始配件，以实现不同的要求。专业5000，专业300和专业1000
