用Lino L4P1＆Disto™D2构建石膏板

作者：Cornelia Dietz

Edin Osmanagic started his own business, founding Solid-Bau in 2012 dedicated to drywall construction and interior design. Since its establishment, he has engaged two additional drywall builders. The tasks in interior construction are diverse, such as prefabricated walls, suspended ceilings, linings, flooring systems and built-in fixtures.

在1998年，Osmanagic完成了他的学徒制度和石膏板制造商的学徒制，使用尺寸胶带完成了大量工作。必须根据毕达哥拉斯以三个，四，四和五的比例来艰苦地计算三角形。两个人完全占据了四到五天，准备了20个单位的住宅综合体的高程。

测量和计算区域和卷现在变得更加容易，更有效。使用Leica DISTO™ D2和Leica Lino L4P1, Osmanagic hasreduced his time and cost savings to more than 50 per cent。

“多亏了多行激光Lino L4P1和激光距离仪表DISTO™D2，如今一切都变得更加有效，”said Osmanagic.“现在，我们只需要两天才能让两个人完成相同的工作。”

精确有效地建造螺柱墙

Osmanagic与他的两名员工合作进行了一个新的建筑项目，该项目包括在德国Lindau的两座大型住宅建筑。他们的任务是用一个wall surface area of 1,200 square metres, 60 m2 of shaft walls公寓门近100架钢架。

The desired distance to the wall was measured with the DISTO™ D2 and marked to start setting the wall. The cross line laser of the L4P1 was then exactly positioned over the reference mark to align the vertical laser line with millimetric accuracy. A chalk line was then used to mark the floor and ceiling. The frame sections were, subsequently, secured in place to fix the plasterboard and insulation.

"The L4P1 is accurate and has a lot of advantages. What I personally like the most is the fine adjustment wheel that has no clearance. When you correct the laser line to the left or right it acts immediately and flawlessly”，充满热情的奥斯曼尼奇。

The L4P1 is an all-in-one 180° multi-line laser layout tool designed for快速设置。The fine-tune knob allows users to adjust the line or cross point for perfect placement with laser lines that are highlyvisible even in bright daylight。多亏了锂离子储物电池，L4P1可以是operated for up to 24 hours。

Osmanagic使用Disto™D2主要用于测量。可以立即完成测量区域和运行仪表。其他功能，例如Pythagoras功能，赌注输出功能或面积/音量同样易于使用。如果客户需要其他计划中未包含的其他固定装置，则可以立即进行重新评估以确定所需材料的量。这样，可以在经过验证的基础上进行初始谈判。

在他多年的经验中，Osmanagic在遇到Leica Geosystems的激光距离仪表，线和点激光器之前与几个不同的激光合作。今天他致力于L4P1，因为与之合作是easier, efficient, accurate and faster。In the construction industry, price erosion has been extremely high in recent years, hence, efficiency tops the list of requirements for maintaining a competitive advantage.