Leica Caintivate的经验继续与我们的专家进行访谈

TheLeica Caintivate经验继续……5月2日宣布了一些新解决方案。我们已要求Alastair Green，现场SW业务总监，Bernhard Richter，GNSS商业总监Bernhard Richter和TPS商业总监Hans-Martin Zogg解释什么是新解决方案，什么是什么。对用户的好处。

Alastair, what are the new solutions which were launched with the Captivate v2.00 release?

我们发布了许多新软件和硬件解决方案。这包括

Leica Captivate v2.00对于所有CS20，CS35，TS16，TS60和MS60。该软件，其中大多数由Bernhard和Hans-Martin描述，包括许多新功能，例如

- 支持新的自我学习Leica GS16，其555个频道，rtkplus，smartlink和smartlink填充，

- 在Leica MS60上：新的动态锁以及所有TS16，TS60和MS60，新的定向对象设置方法

- 以及少数其他功能和错误修复。

Leica SmartWorx Viva v6.00对于所有CS10，CS15，TS15，TS50，TM50和MS50。这些控制器和仪器的新软件中主要有错误修复。由于SmartWorx Viva也在GS传感器上运行，因此该版本也应加载到GS10，GS14，GS15和GS25上。

Full details of all new functionality can be found in the release notes which can be downloaded frommy World.

我们从客户那里收到很多愿望和想法，并始终尝试尽可能多地实施。这是一个持续的过程，将在接下来的几年中继续进行 - 因此，请确保将CCP（客户服务软件包）保持最新，以便您始终安装最新版本。

Bernhard, the new self-learning GS16 was already mentioned by Alastair. What does “self-learning” mean?

As most people know, in the last few years the number of signals from increasing satellite constellation (GPS, Glosnass, BeiDou, Galileo) have grown significantly and this will continue in future.

But more signals do not automatically result in better performance. More signals can create more noise.

The intelligent adaptation to changing conditions by selecting the optimal signal combination is the key to deliver the most accurate positions. Therefore a self-learning GNSS sensor adapts to the conditions in which the sensor is being used.

这意味着，无论使用自我学习的GNSS传感器，最佳可用的卫星信号和最佳可用校正数据是自动选择的。无论周围条件如何，这最终都会带来最佳的位置和准确性。

用户不必担心所有卫星星座 - Leica GS16为他们做到这一点，他们可以比以往任何时候都更有效地工作。

观看视频以了解更多信息

什么是SmartLink，用户如何从中受益？

SmartLink是一项订阅服务，其中GNSS校正数据通过增强卫星传输（与GNSS卫星不同）。

它利用从地静止卫星的校正来计算+/- 3厘米（2D）精度的位置。

SmartLink是任何本地网络（例如SmartNet）中数据差距的理想桥接服务，以保持CM定位，并解决歧义。在完整的偏远区域中，通常在20到40分钟之间的初始收敛期之后可以达到相同的精度。

因此，用户可以肯定的是，即使丢失了RTK数据流，甚至根本没有RTK校正，他的GS16仍将继续提供CM位置。

让我们看一下MS60多阶段。汉斯·马丁（Hans-Martin），您能解释一下动态锁定功能吗？用户可以从中受益？

到目前为止，只有当棱镜通过望远镜的视野时，左右的MS60才检测到并锁定在移动的棱镜上，望远镜的视野相当狭窄，1.5°。

With the new dynamic lock, the field of view has been enlarged to a vertical laser fan of +/-20°. The MS60 can lock now onto a prism, as soon as the prism crosses this vertical fan. The instrument will detect and lock to the prism.

The new dynamic lock on the MS60 increases the efficiency of the user in many ways, for example when staking out, on construction sites with many obstacles or when a prism is mounted on a moving construction machine.

Let’s watch the video to see these use cases in detail

What is the new “Orientate to object” method about?

“Orientate to object” is a new additional setup method for total stations and MultiStation which allows to orientate the instrument’s coordinate system into an object coordinate system. The difference between common setup methods is that with “orientate to object” the horizon of the two coordinate systems do not need to be parallel. In other words, the vertical axis of the two coordinate systems do not need to be parallel. Or the z-axis of the object is not in the direction of gravity.

This new setup methods opens up new application areas, such as for instance as-built check of pre-fabricated elements. An example could be a concrete beam fabrication factory. For this use case, the instrument is setup in the factory and is measuring the concrete beams. Each beam has its “own coordinate system”. The beams are not moving and simply need to be measured to check tolerances prior to delivery.